AeroScreen Design:
Sport AeroScreens: Primarily designed to provide torso protection while leaving the driver's helmet in clean air. This is important to the serious off-road driver who wants protection while getting to the off-road riding destination, but wants to reduce the risk of breaking the screen if bike's dropped while off-roading. Made from impact modified acrylic which is similar in strength to polycarbonate but lighter and doesn't require hardening.

Sport AeroScreens are great for sport riding in the twisties 'cause they block wind to the body while allowing an unobstructed view of the road.

Sport AeroScreens are also great for around town driving and short trips, especially in the heat as they allow more cooling airflow to the body.

All Sport screens are designed to create clean airflow but need to be adjusted so helmet is in clean air.

As with the stock BMW screen, envelope of protection created by the Sport AeroScreens is greatly reduced when riding in heavy, gusting winds and turbulence.

Notes:
1. Adjusting screen from full-down to full up will lift air about 5" at face or body.
2. Seat height adjustment from Low to High position drops where air hits face or body by about 3".

Standard Height Sport AeroScreen: 8 3/4" in length, 17" wide.
Great off-road screen! Smaller size allows an unobstructed view, with little chance of breakage if bike goes down.

Medium Height Sport AeroScreen: 11 3/4" length, 17" wide.
Over the helmet airflow is achievable for riders approximately 5'8" or shorter depending on seat height, use of bar-risers, etc. Blocks air to chest of drivers for riders 5'9" to 6' leaving helmet in clean air.

Tall Height Sport AeroScreen: 14 1/2" length, 17" wide.
Over the helmet airflow is achievable for riders, approximately 5'11" or shorter depending on seat height, use of bar-risers, etc. Blocks air to chest of drivers for riders over 6', leaving helmet in clean air.

AeroFlow

R1250GS|R1250GSA|R1200GS WC|R1200GSA WC

Sport AeroScreen
Produced by Aeroflow of USA